Back to top

Cement Testing Equipment

The Cement Testing Equipment is made available by us in various types and is suitable for various industries. Cement tests are performed to know the strength and characteristic properties of cement. Various test on cement is known nowadays to check the quality of cement. To know the properties of cement such as specific gravity, strength, fineness, consistency, etc. various cement testing methods are used. Flow table test of concrete also determines the quality of concrete concerning its consistency, cohesiveness and the proneness to segregation. Cement Testing Equipment is very efficient.
Product Image (14)

Flow Table

  • Application:Laboratory
  • Interface Type:Automatic/ Manual
  • Material:Brass
  • Operate Method:Electric
  • Product Type:Flow Table
  • Usage:used to determine the workability of mortar by measuring its flow.
  • Voltage:230 Volt (v)
Product Image (15)

Motorised Flow Table

  • Equipment Type:Motorised Flow Table
  • Accuracy:1 cycle or 0.5 mm (as applicable)
  • Display Type:Mechanical/Counter & Graduated Scale
  • Interface Type:Manual/Mechanical
  • Machine Weight:125 kg (Approx.)
  • Measuring Range:As per IS:5512, BS:4551, ASTM C230/EN 459-2
  • Response Time:Immediate (mechanical)
  • Temperature:+5C to 40C (Operating)
Product Image (01)

Slump Cone Apparatus

Price: 2500 INR/Piece
  • Equipment Type:Concrete Slump Cone Apparatus
  • Interface Type:Manual
  • Machine Weight:Approx. 3 kg
  • Measuring Range:0-300 mm
  • Mounting Type:Portable/Free-standing
  • Number of Specimens:1 per test
  • Resolution:1 mm
  • Test Speed:Manual
Product Image (02)

Gauging Trowel SS With Wooden Handle

  • Equipment Type:Gauging Trowel
  • Application:Mixing and applying mortar or plaster in construction works
  • Control Mode:Manual
  • Features:Corrosion resistant, Durable handle, Smooth finish
  • Hardness:Stainless steel hardness - moderate (approx. 50 HRC)
  • Machine Weight:Approx. 250 grams
  • Mounting Type:Handheld
  • Usage:Used for gauging and mixing mortar, plaster, or cement
Product Image (03)

SS Humidifier

  • Capacity:3 Ltr
  • Color:Silver
  • Features:Accuracy, Durable, Stable Performance
  • Interface Type:Automatic
  • Material:Stainless Steel
  • Product Type:SS Humidifier
  • Usage:Industrial
Product Image (04)

Channel Type Cube Testing Machine

  • Control Mode:Manual / Digital
  • Features:Heavy-duty channel frame, precision load cell, safety guards
  • Frequency:50 Hz
  • Operating Voltage:220-240V AC
  • Power Supply:220V AC, 50 Hz
  • Resolution:0.1 kN
  • Specimen Size:150 mm x 150 mm x 150 mm
  • Test Width:150 mm
Product Image (05)

Shrinkage Bar Mould

  • Capacity:20 Ton
  • Features:Accuracy, Durable, Stable Performance
  • Material:CI, MI
  • Operate Method:Hand Driven Operated
  • Product Type:Shrinkage Bar Mould
  • Usage:Industrial
  • Voltage:210 Volt (v)
Product Image (06)

Planetary Mixer Mortar Mixer

  • Automation Grade:Semi-automatic
  • Humidity:Up to 90% RH
  • Number of Specimens:Up to 3
  • Port Size:2 inch inlet
  • Power Supply:220V / 50Hz
  • Resolution:0.01 g
  • Test Speed:60 rpm
  • Test Stroke:150 mm
Product Image (08)

Compression Testing Machine

  • Equipment Type:Compression Testing Machine
  • Accuracy: 1% of indicated value
  • Application:Testing compressive strength of cement, concrete, and other building materials
  • Display Type:Digital LCD Display
  • Interface Type:RS232 / USB (Optional)
  • Machine Weight:Approx. 700 kg
  • Measuring Range:0 - 2000 kN
  • Response Time:Within 2 seconds
Product Image (11)

Soundness Test Apparatus

  • Humidity:10% - 90% RH
  • Mounting Type:Tabletop
  • Number of Specimens:Up to 6 at once
  • Port Size:1/4 inch
  • Power Supply:230 V AC, 50 Hz
  • Resolution:0.01 mm
  • Test Speed:30 rpm
  • Test Stroke:10 mm
Product Image (12)

Blain Air Permeability Apparatus

  • Application:used to determine the specific surface as total surface area in cm/g of material.
  • Color:Silver
  • Features:Easy installation, Low maintenance, Quality tested
  • Material:Stainless Steel
  • Operate Method:Manual
  • Product Type:Blain Air Permeability Apparatus
  • Usage:Industrial Use, Laboratory
  • Voltage:120 Volt (v)
Product Image (14)

Vibrating Machine

Price: 22000 INR/Number
  • Features:Easy installation, Low maintenance, Quality tested
  • Interface Type:Automatic
  • Material:Cast Iron
  • Product Type:Vibrating Machine
  • Usage:Industrial
  • Voltage:120 Volt (v)
Product Image (17)

Scientific Rotap Sieve Shaker

  • Equipment Type:Rotap Sieve Shaker
  • Accuracy:1% (mesh dependent)
  • Application:Particle size analysis, grading, material separation for laboratory and industrial use
  • Display Type:Analog Timer
  • Machine Weight:Approximately 40 kg
  • Measuring Range:20 m125 mm
  • Response Time:Immediate
  • Usage:Soil, powder, aggregate, and chemical particle analysis
Product Image (18)

Scientific Table Model Sieve Shaker

  • Automation Grade:Semi-automatic
  • Humidity:Up to 85% RH (non-condensing)
  • Mounting Type:Table-top
  • Number of Specimens:Multiple sieves can be stacked
  • Port Size:Standard sieve mounting ports
  • Resolution:As per sieve size
  • Test Speed:Standard, adjustable motor-driven vibration
  • Test Stroke:Variable amplitude
Product Image (19)

140 PSI Grout Pump

  • Control Mode:Manual
  • Features:Portable, corrosion-resistant, easy disassembly
  • Frequency:50 Hz
  • Humidity:Up to 90% RH, non-condensing
  • Mounting Type:Floor mount
  • Operating Voltage:220V
  • Specimen Size:Up to 25 mm aggregate
  • Test Speed:Variable, up to 2 liters/min
Product Image (20)

Standard Spatula

  • Color:Silver
  • Features:Easy Usage, Quality Tested, Light Weight
  • Material:SS, MS
  • Operate Method:Manual
  • Product Type:Standard Spatula
  • Usage:Laboratory
  • Weight:Max, 340 Grams (g)
Product Image (21)

Le-Chatlier Waterbath

Price: 5500 INR/Piece
  • Capacity:6 Le-Chatelier moulds
  • Control Mode:Manual
  • Features:Double walled design, thermostatic temperature control
  • Frequency:50 Hz
  • Operating Voltage:230 Volts AC
  • Specimen Size:Le-Chatelier moulds (standard)
  • Temperature:Ambient to 100C
  • Usage:Used in cement testing laboratories
Product Image (22)

Cube And Cylindrical Mould

  • Application:Concrete, cement, mortar specimen casting for compressive strength testing
  • Control Mode:Manual, static
  • Hardness:Not Specified (typically >HRB 60 for cast iron moulds)
  • Max Height:Up to 300 mm (for cylindrical moulds)
  • Specimen Size:Cube: 50 mm, 100 mm, 150 mm; Cylinder: 150 x 300 mm, 100 x 200 mm and others
  • Temperature:-10C to 60C usable working range
  • Test Range:Up to 150 mm
  • Test Width:50 mm to 150 mm (based on specimen specification)
Product Image (23)

Ennore Sand

  • Application:Casting, Foundry, Construction
  • Features:High purity, Natural sand, Consistent granule size
  • Usage:Industrial, Laboratory, Testing
X